Otodynamics Otoport Advance User Manual Download Page 40

Page: 40 / 296

CHAPTER THREE

Getting started

3.4

Connecting probes and electrodes

The connections panel for probes and electrodes is found at the top end of

the module.

3.4.1

Connecting the probe

Follow instructions for connecting the probe to the Otoport in section

3.8

If you are using two probes, ensure that the probe head colour matches the

probe socket; the probe with the red head should be conected to the red

socket and the blue head to the blue socket.

Getting started

Summary of Contents for Otoport Advance









































































































































































































































































































Search results

Summary of Contents for Otoport Advance

Reviews:

Related manuals for Otoport Advance

Brands by name

Popular brands

Otodynamics Otoport Advance, User Manual

Search results

Summary of Contents for Otoport Advance

Reviews:

Related manuals for Otoport Advance

Brands by name

Popular brands