![background image](http://html1.mh-extra.com/html/otis/oi-6900-x-x-t-2b/oi-6900-x-x-t-2b_operation-manual_1658599025.webp)
OPERATION SETTINGS
OI-6900-X-X-T-2B OPS_GUIDE_REV 1.1
19
4
OPERATION SETTINGS
At the time of installation, when the batteries are first connected to the OI-6900, the unit is automatically placed into OFF
mode, pressing the ADD button begins the startup sequence. During the 1-minute warmup, the display will show a
countdown of the time remaining until the system start-up is complete. The Otis logo and the unit information will also flash
on the display screen and, at the end of the countdown, the device will be in normal operating mode.
4.1
POWERING THE DEVICE
4.1.1
POWERING ON
Powering on the device begins the operation of the unit, automatically initiating the system start-up cycle
and 1-minute warmup period. The OI-6900 will be in normal operating mode at the completion of the
system start-up.
1.
Press the ADD button once to power the unit.
4.1.2
POWERING OFF
Powering off the device stops the operation of the unit. The product settings and configuration, as well
as the operation settings, including the null and calibration of the sensor, will be unaffected.
1.
Press and hold the SUB button for approximately 6 seconds, until “OFF” shows on the display
screen.
The display screen will continue to show “OFF” for the duration of time that the unit is powered off, as
long as the batteries remain plugged into the unit.