Timer recording will only start at
pre-set time and day of the week (For
example, every Monday at 10 AM for 3
hors)
If duration set to “
Cancel
”, the unit
will start to record the event
continuously
until capacity of selected
storage media (HDD or SD card) is full.
Important Notice:
After make changes on these options, be sure to
press “
Enter
key” once for option
confirmation. If
Enter
key is not pressed,
the newly selected option will not take effect.
Motion Rec (Motion detect Recording):
Options—On/Off
If set the motion detect recording to “
On
”;
a pop up screen will show up in the screen
for confirmation, use
Left/Right
/
key to select yes or no, then press
Enter
key to confirm
Motion Setup:
Press
Enter
key to enter motion setup
mode; A Live record standby screen will show
up, there are 16 zones display in the screen (4x
4) representing 16 motion-detective zones, use
Left/Right
/ key to move the
□
to
desire position, press
Enter
key to mark
the Zone as
□
or
■
; after setting the desire
detective zones, press
Stop/Exit
key to exit setup mode
Note:
□
—>
Not under Motion-Detection
Selected zone (s) is free from
motion-detection and any movements
detected from these zones will not trigger
Last Update: 20-Jul-06
22
