12
Inserting the sound processor into the Swim Sleeve
Note:
Always use rechargeable batteries to power the sound processor when using the
Swim Kit. Zinc-Air batteries rely on fresh air supply to produce power and therefore can
not be used inside a Swim Sleeve.
Open the lid of the Swim Sleeve.
Inspect the Swim Sleeve to ensure
it is free from any dirt, dust and hair
fragments in the opening for the Swim
Antenna connector, and the opening
and lid for the processor insertion.
Insert the sound processor fully into
the Swim Sleeve. During the insertion,
bend the sleeve and carefully lead the
sound processor hook to its place to avoid
it is stocked to the sides.
Summary of Contents for Swim Kit
