background image

60

61

  About     Startup     Handling     Options     Tinnitus     Warnings     

More info

  

Water and dust resistant (IP68)

Your hearing aid is dust-tight and 

protected against ingress of 

water, which means it is designed 

to be worn in all daily life situations. 

Therefore, you do not have to worry 

about sweat or getting wet in the 

rain. Should your hearing aid come 

into contact with water and stop 

working, please follow these 

guidelines:

1.  Gently wipe off any water 
2.  Open the battery drawer, remove 

the battery, and gently wipe off 

any water in the battery drawer

3.  Let the hearing aid dry with the 

battery drawer left open for 

approximately 30 minutes

4.  Insert a new battery

IMPORTANT NOTICE

Do not wear your hearing aid while showering or participating in water 

activities. Do not immerse your hearing aid in water or other liquids.

Conditions of use

Operating conditions

Temperature: +1°C to +40°C

Relative humidity: 5% to 93%, non-condensing

Storage and transport 

conditions

Temperature and humidity shall not exceed 

the below limits for extended periods during 

transport and storage:

Temperature: -25°C to +60°C

Relative humidity: 5% to 93%, non-condensing

Summary of Contents for Oticon Opn 1 BTE13 PP






































Reviews: