26
27
How to use FittingLINK
FittingLINK has been designed to offer
you the best possible daily use during
programming sessions with and without
your clients.
Programming without a client
When you want to program hearing
instruments without a client wearing
them, turn
ON
FittingLINK.
Place FittingLINK with the neck loop flat
on a table and the hearing instruments
on each side of the neck loop as shown
in the drawing.
When you program hearing instruments,
the neck loop must always be closed as
shown in the drawing.
5-10 cm/
2-4 in.
5-10 cm/
2-4 in.
FittingLINK and your fitting software
When opening your fitting software the first time after FittingLINK has been installed on
the PC, it will be detected as a programming device.
Depending on which fitting software you are using, FittingLINK is either automatically
added as an option on the "Detect button" or needs to be manually detected and selected
as programming device in the "Preferences" menu.
For specific information about how to use FittingLINK with your fitting software,
please refer to the documentation delivered with your fitting software (e.g. installation
handbooks, help files or instructional videos).
Summary of Contents for FittingLINK WP-2
Page 1: ...INSTRUCTIONS FOR USE...
Page 30: ...0000173877000001...
