*Ensure Streamer Pro is around the user’s neck.
2. WIRELESS SETUP METHOD
AUX cable
Sennheiser box & coiled phone cable
Phone Adaptor 2.0 & power source
Setup Instructions
Connect the power supply and mini
jack end of the AUX cable to the
Phone Adapter 2.0 as pictured.
Step 1
Ensure the Phone Adapter 2.0 is plugged in
and has been paired with the Streamer Pro.
You can now handle calls wirelessly with
Streamer Pro.*
Step 3
Follow steps 1-3 from the hard-wired
setup instructions (opposite side).
Then, connect the AUX cable to the
Sennheiser box as pictured.
Step 2
15
50
0-
28
34 / 0
5.
13
Handling calls using the wireless setup method:
•
No alerts will be heard through the hearing instruments.
(the ring sounds on the phone only)
•
Ensure the phone button on the Sennheiser box is in the up position. (not
pressed down)
•
When the phone rings, press the Phone button on Streamer Pro first. Wait
until you see a green and blue light on the Phone Adapter 2.0.
•
Pick up the receiver and place it on the desk or table surface. Conduct the
conversation through the Streamer Pro as usual. When finished, replace
the receiver and push the Phone button in Streamer Pro to end the wireless
connection.
•
For outgoing calls, press the Phone button on Streamer Pro to establish the
wireless connection. Pick up the receiver, set it down, and dial the number.
The call will go through. When finished, replace the receiver and press the
Phone button on Streamer Pro to end the wireless connection.
Digital Office Phone Kit
Easy Setup Instructions
(Before beginning, insert the included battery into the Sennheiser device.)
You will use Streamer Pro in conjunction with the
Phone Adapter 2.0 & power source, Sennheiser
box, coiled phone cable, and AUX cable, pictured
below:
Control settings on the bottom
of the Sennheiser box:
•
Set the ABC switch to the
position that provides the
best sound quality.
•
Rotate the small volume
control dial to achieve the
best balance of sound quality
and volume for both parties.
