Oticon Medical Ponto Pro Power, User Manual

Page: 10 / 44

10
Turning it ON and OFF or stand-by
ON
Ponto is turned ON by closing the battery door. After a start up jingle there is a few
seconds’ delay before the sound processor is turned on. This will protect you from
uncomfortable noise while connecting the sound processor.
OFF
Ponto is turned
OFF
by opening the battery door. It is enough to open the battery door
halfway, this prevents the battery from falling out. During longer storage it is recom-
mended to remove the battery from the sound processor.
sTaND-By/MuTe
If you want to turn off the sound processor for shorter periods, press the push button
and hold until 2 beeps are presented and then release the button. The sound processor
will now be in stand-by/mute mode and the volume will be set to zero. To hear sound
again, shortly press and release the push button and Ponto will resume in its previous
setting. It is not recommended to use the stand-by mode during longer periods, more
than 5 hours, since this will reduce the battery lifetime.