23
E
Finishing Process
Observe the following under all circumstances:
We recommend examining the work pieces for their suitability of being
processed in the ECO-mini. The manufacturer does not guarantee work
pieces with weak areas, which have a high probability of breakage. Well-set
stones do not normally fall out when finishing with the ECO-mini “dry”.
The manufacturer does not assume any liability if this should however occur.
Steps for the finishing process
1.
Fill the granulate into the process-container (max. 1.5 litres).
2.
Set finishing time.
Turning the timer in a clockwise direc-
tion sets the finishing time and also
starts the machine. Maximum time:
15 hours (at 115 V: 12 hours). The
machine switches off automatically
after the time set has expired. The
machine switches off immediately
when the timer is manually turned
back to “0”.
3.
Add work pieces.
4.
If possible, the goods should be cleaned
after processing in ultrasonic bath to
remove any polishing paste residues.
Tip: Always start finishing using only a few work pieces. This allows
you to gain experience in the handling of larger quantities. Do not
overload the machine with too many pieces as this may result in
pieces damaging each other in the machine.
The process timer with the scale
(shows the time in hours) serves at
the same time as START/STOP switch
Summary of Contents for ECO mini dry
Page 1: ...dry w w w eco m ini com...
