OTE Speedport Entry 2i, Maintenance Management Manual

Page: 8 / 99

SJ-20162405182123-002|2016-05-24 (R2.0)
Speedport Entry 2i Maintenance Management Guide
1-2
Indicator Color Status Description
Service
— Off No upgrade.
Orange On The software upgrade is in progress.
WPS
— Off The WPS button is not pressed, or the connection times out.
White
Flashing
2Hz
The WPS button is pressed.
If no wireless client is connected successfully, the light flashes for
about 2 minutes.
On
If the wireless client is connected successfully , the light goes on
for about 5 minutes.
1.2.
Interfaces and Buttons
Figure 1-2 shows the interfaces and buttons on the front panel of the Speedport Entry 2i.
Figure 1-2 Buttons on the Front Panel
Table 1-2 describes the interfaces and buttons on the front panel of the Speedport Entry
2i.
Table 1-2 Descriptions of the Buttons on the Front Panel
Button Description
WLAN
Press the button for more than 0.5 seconds in power-On state. Then,
the wireless client can connect to Speedport Entry 2i.
WPS
Press the button for more than 0.5 seconds in power-On state to
enable the function.
Figure 1-3 shows the interfaces and buttons on the back panel of the Speedport Entry 2i.