OTE Speedport Entry 2i, Maintenance Management Manual

Page: 72 / 99

SJ-20162405182123-002|2016-05-24 (R2.0)
Speedport Entry 2i Maintenance Management Guide
4-20
4.5.
Configure the UPnP
This page provides the parameters of UPnP configuration features.
Steps
1. On the main page of the Speedport Entry 2i, select Local Network > UPnP to go to
the UPnP page.
The page is shown in Figure 4-24 .
Figure 4-24 UPnP Page
Table 4-16 lists the UPnP parameters.
Table 4-16 Parameter Descriptions for the UPnP
Parameter Description
UPnP Set radio button
2. Click Apply button to apply the changes.
– End of Steps –