SJ-20162405182123-002|2016-05-24 (R2.0)
Speedport Entry 2i Maintenance Management Guide
4-8
Figure 4-9 DHCP Server (IPv4) Page
5. Configure the DHCP server parameters.
lists the DHCP server parameters.
Table 4-6 Parameter Descriptions for the DHCP Server
Parameter
Description
DHCP Server
Select
On
to let the device work as a DHCP server and
assign IP addresses to the client PCs or wireless devices.
LAN IP Address
The IP address of t he LAN router (S p e ed p o r t E n t r y 2 i ) .
Subnet Mask
Subnet mask of the device.
DHCP Start IP Address
The start IP address of the DHCP address pool.
DHCP End IP Address
The end IP address of the DHCP address pool.
ISP DNS
Select
On
to enable the ISP DNS.
Primary DNS
IP addresses of the DNS server1
Secondary DNS
IP addresses of the DNS server2.
Lease Time Mode
The mode of Lease Time.
Custom Lease Time
(in seconds)
The time during which the client PCs use the IP addresses
assigned by the DHCP server.
After the lease time expires, the private IP address will be
available to be assigned to other network devices.
6. Click
Apply
button to apply the changes.
DHCP binding
7. Click
.
