OTE Speedport Entry 2i, Maintenance Management Manual

Page: 58 / 99

SJ-20162405182123-002|2016-05-24 (R2.0)
Speedport Entry 2i Maintenance Management Guide
4-6
Table 4-4 lists the Access Control-Rule setting parameters.
Table 4-4 Access Control-Mode parameters
Parameter Description
No Filter No filter is to be applied (the default).
Black List Deny LAN users to access specific address.
White List Allow LAN users to access specific address.
4. Click Apply button to apply the changes.
Access Control-Rule Settings
5. Click .
The page is shown in Figure 4-7 .
Figure 4-7 Access Control-Rule Settings
6. Configure the Access Control-Rule Configuration parameters.
Table 4-4 lists the Access Control-Rule parameters.
Table 4-5 Access Control-Rule parameters
Parameter Description
Name The name of Access Control Item.
Choose SSID Choose the SSID to from SSID1, SSID3, SSID4.
MAC Address The MAC address of the wireless device.
We suggest to set the MAC addresses in Access Control
List using a wireline connected device.
Modifying the list using a wireless device may cause
unexpected disconnections of the device used.
7. Click Apply button to apply the changes.
– End of Steps –