© Bosch Automotive Service Solutions Inc.
Sheet No.
Issue Date: Rev. F, June 22, 2017
7. Remove the top and regulator assembly from the Fuel Injector Cleaner container. Pour fuel injector cleaner
(one can of OTC No. 7000A - Pro Inject-R-Kleen
®
) into container. Install top and regulator assembly.
8. Use the chain and hook to hang the Fuel Injector Cleaner from the hood of the vehicle.
9. Refer to the vehicle service manual — or optional
OTC Professional Fuel Injection Application Manual
— to
determine fuel pressure operating specifications. Connect the Fuel Injector Cleaner to the inlet of the fuel
rail.
Note: To keep cleaner fluid from going back to tank, block the fuel return line or adjust the regulator
to run vehicle at 5 PSI under fuel pressure specifications.
10. Turn regulator on top of Fuel Injector Cleaner to full OPEN position (counterclockwise).
11. Attach a shop air hose to fitting on top of cleaner container.
12. Adjust regulator (by turning it clockwise) to vehicle manufacturer’s fuel running specification, or 5 PSI
under the manufacturer’s specs. to prevent fuel return.
13. Open shut-off valve to full OPEN position (counterclockwise).
14. Start engine and let it run at 1,000 – 1,500 RPM.
Note: Adjust air pressure to obtain a smooth RPM, if
necessary.
15. Run engine until container is empty and engine stalls.
16. Turn OFF ignition.
17. Turn shut-off valve to full OFF (clockwise).
18. Disconnect air supply. Turn regulator to full OPEN (counterclockwise) to release pressure in container.
19. Remove cleaner. Remove fuel adapter fitting. Connect fuel line. Remove block on fuel return line and
connect fuel return line, if applicable. Connect fuel pump power.
20. Start the engine and check for fuel leaks.
Parts List & Operating Instructions
Form No. 107340
2 of 3
1. Read, understand, and follow the
Safety Precautions
on the previous
page before using the Fuel Injector
Cleaner.
2. Run the engine until it reaches
normal operating temperature.
3. Shut OFF the engine. Turn OFF all
accessories.
4. Disable the fuel pump.
Note: It is
best to unplug the fuel pump at the
fuel tank. On some vehicles, pulling
the fuel pump fuse also disables the
ignition system or fuel injectors.
5. Turn OFF the shut-off valve at the
bottom of the Fuel Injector Cleaner
container. See Figure 1.
Note: Valve
is OFF if it is turned all the way
clockwise.
6. Install the hose assembly on the
socket coupler as shown.
Cleaning Fuel Injectors
Note: The optional OTC Professional Fuel Injection Application Manual contains instructions and diagrams
specific to each vehicle system.
Socket
Coupler
Figure 1
Regulator Assembly
Shut-off
Valve