10
The Tool will indicate Ready (ok), Not Ready (inc), or Not Applicable
(n/a) for each I/M Monitor. The Tool supports the following I/M Monitors:
Monitors
Expanded Name
Misfire Monitor
Misfire Monitor
Fuel System Mon
Fuel System Monitor
Comp Component
Comprehensive Components Monitor
Catalyst Mon
Catalyst Monitor
Htd Catalyst
Heated Catalyst Monitor
Evap System Mon
Evaporative System Monitor
Sec Air System
Secondary Air System Monitor
A/C Refrig Mon
Air Conditioning Refrigerant Monitor
Oxygen Sens Mon
Oxygen Sensor Monitor
Oxygen Sens Htr
Oxygen Sensor Heater Monitor
EGR/VVT Sys Mon
Exhaust Gas Recirculation or Variable Valve Timing Monitor
NMHC Cat Mon
Non-Methane Hydrocarbon Catalyst
NOX Treat Mon
Nitrogen Oxide Treatment
Boost Pres Mon
Boost Pressure
Exhst Gas Sensr
Exhaust Gas Sensor
PM Filter Mon
Particulate Matter Filter
This is a complete list of I/M Monitors supported by the Tool. The number
of Monitors read by the Tool from your vehicle may vary. A diesel vehicle,
for example, does not have an Oxygen Sensor Monitor. As a result,
there will be no Oxygen Sensor Monitor status for a diesel vehicle.
Two types of
I/M Monitors
tests are:
Since DTCs Cleared -
shows status of the monitors since the
DTCs were last erased.
This Drive Cycle -
shows status of monitors since the start
of the current drive cycle. Refer to the vehicle service manual
for more detailed information on emission-related monitors
and their status.
9
Some vehicles
do not
support
This Drive Cycle
. If vehicle
supports both types of monitors the
I/M Monitors Menu
displays.
