OTC Wireless WiSER2400 User Manual Download Page 20

Appendix A: 

Limited Warranty 

 
WiSER2400 Hardware 

The seller warrants to the end user (“Customer”) that this hardware product will 
be free from defects in workmanship and materials, under normal use and 
service, for one (1) year from the date of purchase from the seller or its 
authorized reseller. The seller’s sole obligation under this express warranty shall 
be, at the seller’s option and expense, to repair the defective product or part, 
deliver to Customer an equivalent product or part to replace the defective item, or 
if neither of the two foregoing options is reasonably available, The seller may, in 
its sole discretion, refund to the Customer the purchase price paid for the 
defective product. 
 
All products that are replaced will become the property of the seller. 

 

Replacement products may be new or reconditioned. 

 
WiSER2400 Software 

 

17

The seller warrants to Customer that each software program licensed from it, 
except as noted below, will perform in substantial conformance to its program 
specifications, for a period of one (1) year from the date of purchase from the 
seller or its authorized reseller.  The seller warrants the media containing 
software against failure during the warranty period. No updates are provided. The 
seller’s sole obligation under this express warranty shall be, at the seller’s option 
and expense, to refund the purchase price paid by Customer for any defective 
software product, or to replace any defective media with software which 
substantially conforms to applicable seller published specifications. Customer 
assumes responsibility for the selection of the appropriate application programs 
and associated reference materials. The seller makes no warranty or 
representation that its software products will meet Customer’s requirements or 
work in combination with any hardware or software applications products 
provided by third parties, that the operation of the software products will be 
uninterrupted or error free, or that all defects in the software products will be 
corrected. For any third party products listed in the seller software product 
documentation or specifications as being compatible, the seller will make 
reasonable efforts to provide compatibility, except where the non-compatibility is 
caused by a defect in the third party’s product or from use of the software product 
not in accordance with the seller’s published specifications or user manual. 

Summary of Contents for WiSER2400


























Reviews: