1. Access Point Information:
This section displays the information of the wireless connectivity status of ACR-
201-G. Each field is described below.
State
The connection/ association status of the wireless port
Wireless Network Name (SSID)
Shows the SSID of the associated AP. To change, see “Wireless
Configuration” Tab “Wireless Network Name (SSID)”.
Channel
Shows the current RF channel that this wireless bridge station is operating
on. To change channel, see “Wireless Configuration” Tab “Channel”.
Transmission Rate
The transmission rate established with the access point if in infrastructure
mode or with a station if in ad-hoc mode.
Communication Strength
The indicator of RF communication signal strength.
BSSID
Network Identifier for basic service set
WEP
Shows if WEP encryption is enabled or not. To enable/disable/change
WEP settings, see “security” tab WEP.
2. Bridge Information:
This section displays basic information of the ACR-201-G unit
Bridge Name
Name of the ACR-201-G device
IP Address
IP Address of this ACR-201-G unit. To manually change the IP Address or
let the Access Point obtain an IP Address from a DHCP Server
automatically, see “IP Addr” in IP Settings under Admin tab..
MAC Address
This is the MAC Address of this ACR-201-G unit. It is a unique physical
address assigned to the unit by the manufacturer. MAC Address cannot
be modified.
Radio Firmware Version
Shows the version information of the radio firmware.
ACR-201-G Technical Manual
10
ACR Firmware Version