When using electrical appliances, basic safety precautions should always be followed to
reduce the risk of fire, electric shock, and injury to persons, including the following:
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
• Use fan only for purposes described in the instruction manual.
• To protect against electrical shock do not immerse unit, plug or cord in water or spray
with liquids. Plug the appliance directly into an electrical outlet of the same voltage as
that of the rating plate in the unit.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use, when moving fan from one location to another,
before putting on or taking off parts and before cleaning.
• Avoid contact with moving parts.
• DO NOT operate in the presence of explosives and/or flammable fumes.
• To avoid fire hazard, NEVER place the cord under rugs or any parts near an open flame,
cooking or other heating appliance.
• DO NOT operate any appliance with a damaged cord or plug or after the appliance
malfunctions or has been damaged in any manner. Return this appliance only to the
nearest Authorized Oster
®
Service Center for examination, repair or adjustment.
• The use of attachments not recommended or sold by the appliance manufacturer may
cause hazards.
• DO NOT let the cord hang over the edge of a table, counter or come in contact with hot
surfaces or leave exposed to high traffic areas.
• DO NOT use outdoors.
• To disconnect, grip plug and pull from wall outlet. NEVER yank on cord.
• Always use on a dry, level surface.
• DO NOT operate fan until fully assembled with all parts properly in place.
• This product is intended for household use ONLY and not for commercial or industrial
applications.
• WARNING: To reduce the risk of electrical shock and injury to persons, DO NOT use in
window.
• WARNING: To reduce the risk of fire or electric shock, DO NOT use this fan with any
solid-state speed control device.
IMPORTANT SAFEGUARDS
1
2
SAVE THESE INSTRUCTIONS
(For 120 & 127 volts only)
To reduce the risk of electrical shock, this appliance has a polarized plug (one blade is
wider than the other). This plug fits a polarized outlet only one way. This is a safety feature
intended to help reduce the risk of electrical shock. If the plug does not fit fully into the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat
this safety feature.
INSTRUCTIONS FOR USE
BEFORE USING FOR THE FIRST TIME
Read and follow all the instructions for this section on use and care and find a place to keep
this instruction manual ready for future reference.
For your convenience, record the complete model number (located at the bottom of the
motor) and the date you received the product, together with your purchase receipt and
attach to the warranty and service information. Retain in the event that the warranty service
is required.
NOTE: The use of attachments not recommended or sold by Sunbeam Products, Inc. may
cause fire, electrical shock, injury or damage to the product.
SUPPORT FEET ASSEMBLY INSTRUCTIONS. FAN IS NOT
STABLE WITHOUT SUPPORT FEET ATTACHED.
1. Lay fan on its face as shown and rotate stand upright. (A loud clicking sound is normal
when fan stand is rotated.)
2. Separate support feet by cutting interconnecting tab.
3. Support feet and stand are marked “A” & “B” on the underside. Align groove at “A” on the
stand. Firmly press down to snap into position. Repeat with foot “B”.
4. The fan is now stable and ready to use.
Projection
Groove
