6
Operating Instructions
To Operate Your Hand Blender
Connection and Use
• Your blender is a three-part assembly. The upper part
contains the motor housing and the speed buttons.
The lower part contains the Blade housing, Chopper
or Whisk attachment.
•
To Lock
: Hold the motor housing in the right hand
and the Blade, Chopper or Whisk housing in the left.
Attach the motor housing up to the Blade, Chopper or
Whisk housing. Rotate the motor housing to the left.
The assembly locks firmly.
•
To Unlock:
Hold the motor housing in the right hand
and the Blade, Chopper or Whisk housing in the left.
Rotate the motor housing to the right to separate the
units.
• Immerse the blade guard completely into ingredients.
• Hold the hand blender firmly.
NOTE:
During blending use, it is normal for suction to be
created at the bottom of the container.
• When desired consistency has been reached, release button and lift the
blender from mixture. To prevent splashing, always release button before
removing blender from ingredients.
CAUTION:
To extend the life of this appliance, never let it operate
continuously for more than 1 minute at a time. After 1 minute of
continuous operation, release button and let appliance rest for 3
minutes before using it again.
WARNING:
Do not use hand blender in saucepan directly on stovetop. Remove
pan from heat before blending.
Blending Cup / Measuring Cup Information
• The cup which is included with your hand blender functions as a mixing
cup, a measuring cup and can also be used for storage.
7
Measuring Chart for Blending Cup
Milliliters
Cups
Ounces
50
.21
1.70
100
.42
3.40
150
.63
5.00
200
.85
6.76
250
1.10
8.50
300
1.25
10.00
350
1.50
12.00
400
1.70
13.50
450
1.90
15.25
500
2.10
17.00
550
2.32
18.50
600
2.50
20.25
650
2.75
22.00
700
3.00
24.00
Using the Chopper Attachment
The chopper accessory is ideal for chopping a wide
range of vegetables, dried fruits, nuts, etc.
• Insert cutting blade into the chopping bowl
• For best results, cut large ingredients into pieces
of approximately 1/2-inch cubed before chopping
NOTE:
Do not chop large ice cubes or extremely
hard foods, such as whole nutmegs, coffee
beans, dried corn and grains.
• Secure the chopper cover by setting on the bowl
and turning to the left. The upper shaft of the
chopping blade will fit into the receiving hole in
the underside of the cover.
• Attach the motor housing into the top of the
bowl cover and turn to the left until the motor
housing is firmly locked into place. Plug cord into
convenient outlet.
• Press and hold the appropriate button to turn the
blender on. Release the button to switch the unit off.
FPSTHBSS Series_14EFM1.indd 7-8
1/23/15 10:09 AM
