English-7
OPERATING INSTRUCTIONS
FILLING THE WATER RESERVOIR
a. Fill the water reservoir with water (see figure 1). You
may use either a jar to fill it up or remove it from the unit
and then fill it up under the tap. Fill the reservoir with the
desired amount of water below the “MAX” level on the
reservoir. Never use warm or hot water to fill the
water reservoir.
b. Close the water reservoir lid. If you have removed it from
the unit to fill up with water, please make sure to place it
back tightly in its place.
FILLING THE MILK RESERVOIR
If you plan to prepare a cappuccino or latte, remove the milk
reservoir from the unit by lifting up on the milk reservoir release
button, simultaneously sliding milk reservoir out, grabbing
milk reservoir by the lid (see figure 2). Then, pour the desired
quantity of cold milk you estimate you will need, making sure it
is below the “MAX” level on the reservoir (see figure 3). Once
finished, slide the milk reservoir back onto the unit ensuring it
fits tightly. You should feel the milk reservoir lock in place.
NOTE: You can use any type of milk you prefer, i.e. whole milk,
low fat milk, organic or soy milk.
CHOOSING THE PORTA-FILTER
Your unit includes One porta-filter for use with ground coffee and
E.S.E. pods.
USING THE PORTA-FILTER FOR GROUND COFFEE AND
E.S.E PODS
CHOOSING THE FILTER
Select the filter to be used as follows:
a. FOR A SINGLE SHOT – use the filter for a single shot of espresso if using ground
coffee, or if using E.S.E. (Easy Serving Espresso) pods.
POD
b. FOR A DOUBLE SHOT OR TWO SINGLE SHOTS – use the filter for a double shot
of espresso. By placing two small cups underneath the porta-filter, you may prepare
two single shots of espresso at once.
NOTE: The pod filter included with your unit has been designed to work only with
E.S.E. (Easy Serving Espresso) (45 mm) pods.
Figure 3
Figure 2
Figure 1
