7
Using the Manual Controls
Use these buttons for personal recipes or to continue mixing
after a Pre-Programmed Setting is finished.
1. Press the ON/OFF power button to turn the product on.
The power light will blink, meaning the product is active
and ready to use.
2. Choose a recipe from the recipe section of
this manual or use one of your own.
3. Put the ingredients into the jar.
4. Secure the Jar Lid with Filler Cap onto the Blender Jar.
5. Press the manual control button of your choice based
on your recipe or blending needs.
6. Press the “Stop” button to cancel the operation
at any time.
7. Press the ON/OFF power button to turn the
product off.
Caring for Your Product
Cleaning
Unplug the blender. Release the 6 Point Star Blade from the Threaded Jar
Bottom Cap by turning the Cap counterclockwise. ALWAYS USE CAUTION
WHEN REMOVING THE BLADE ASSEMBLY. Use the top rack of the
dishwasher for the Jar Lid, Filler Cap and 6 Point Star Blade. Place Sealing Ring
into bottom basket of dishwasher and the Blender Jar in the bottom rack.
You can also wash the parts in warm, soapy water. Rinse well and dry. Wipe the
base with a soft, damp cloth to clean. Never submerge the blender base in any
liquids.
Check the parts as you put them back together.
Storing
Reassemble the blender for storage. Leave the lid open slightly so no odors
are retained.
WARNING: Never put the jar, or any other parts, in a microwave
oven. Never store foods or drinks in the jar.
Servicing
Call our toll-fee, automated phone line to find the Service Center nearest
to you. If repairs are needed, send your appliance only to an authorized
Oster
®
Appliance Service Center. Use only replacement parts from
Jarden Consumer Solutions.
See How to Obtain Warranty Service on page 15.
