background image

1

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed 

to reduce the risk of accidents (such as fire, electric shock, and/or injury to persons), 

including the following recommendations:  

READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT. 

1.   To protect against electric shock, do not place or immerse cord, plugs, or 

appliance in water or other liquid.

2.   This appliance is not intended for use by persons (including children) with 

reduced physical, sensory or mental capabilities, or lack of experience and 

knowledge, unless they have been given supervision or instruction concerning 

use of the appliance by a person responsible for their safety. Children should be 

supervised to ensure that they DO NOT play with the appliance.

3.   Never leave appliance unattended when in use.

4.   Unplug from outlet when not in use, before putting on or taking off parts and 

before cleaning. Allow to cool before putting on or taking off parts, and before 

cleaning. To disconnect, turn the control to the off position, then unplug power 

cord from outlet. Do not disconnect by pulling on cord. 

5.   In models with stand-by mode, a flashing light will indicate the appliance is ready 

for use. Avoid any contact with blade or moveable parts.

6.   DO NOT operate any appliance with a damaged cord or plug or after the 

appliance malfunctions, or is dropped or damaged in any manner. Take the 

appliance to the nearest Authorized Oster

®

 Appliance Service Center for 

examination, repair or electrical or mechanical adjustment. 

7.   For appliances with markings on plug blade: This appliance has important 

markings on the plug blade. The attachment plug or entire cordset (if plug is 

molded onto cord) is not suitable for replacement. If damaged, the appliance 

shall be replaced. 

8.   The use of attachments, including canning jars, not recommended or sold by the 

manufacturer may cause fire, electric shock or injury.

9.   Do not use outdoors or for commercial purposes.

10.  Do not let cord hang over edge of table or counter, or touch hot surfaces, 

including the stove.

11.   Keep hands and utensils out of jar while blending to reduce the risk of severe 

injury to persons or damage to the blender. A scraper may be used but must be 

used only when the blender is not running.

12.  WARNING: Blade is sharp. Handle carefully, especially when removing the 

blade from the jar, emptying the jar and during cleaning.

13.  To reduce the risk of injury, never place blade on base without jar properly 

attached. 

14.  Always make sure the jar is correctly placed onto the base before using the 

appliance. 

15.  Always operate blender with lid in place. Always wait until all moving parts have 

stopped before removing any lid or cover. 

16.  When blending hot liquids, remove the filler cap. Beware of steam. 

17.  Do not use appliance for other than intended use. Misuse can cause injuries. 

Always use appliance on a dry, stable, level surface. Never fill beyond the MAX 

fill line.

18.  If your blender comes with a grounded plug, connect to properly grounded 

outlets only. 

BLSTSE75_20SEPM1 (LA).indd   1

BLSTSE75_20SEPM1 (LA).indd   1

11/6/20   10:16

11/6/20   10:16

Summary of Contents for BLSTSE75

























Reviews: