English-4
English-5
4. Install the integrated blade assembly onto the jar. Turn clockwise to tighten.Be sure
the integrated blade assembly is tightened to the jar before using.
NOTE:
For proper installation onto blender motor base, make sure locking lever rotates
past the anti-rotation tabs on the blender jar or Blend-N-Go cup. See (Fig. 4).
CAUTION:
If locking lever is damaged or missing, do not operate blender, and
contact Customer Service for a replacement.
5. Put the ingredients into the jar.
6. Secure the lid and filler cap.
7. Place the jar onto the base.
8. Plug the power cord into a standard household outlet of the same voltage as the one
indicated in the rating plate of your blender. You are now ready to start.
Using the Automatic Programs
1. Press the ON/OFF ( ) power button to turn the product on. The power light will
blink, indicating the product is active and ready for use. The light will stay on when
the motor is running.
2. Select and press the desired automatic pre-programmed setting button:
· Juices and Smoothies (JUGOS Y SMOOTHIES) - Perfect for blending any kind of beverage
· Food Chop (PROCESADOR DE ALIMENTOS / SALSAS) – Allows to slice, shred
or chop ingredients in blending jar (I.e. soups, purees, salsas, etc.)
3. To change your selection, press ON/OFF ( ) twice followed by another
Pre-Programmed Setting button Juices / Smoothies or Food Chop (“JUGOS Y
SMOOTHIES” or “PROCESADOR DE ALIMENTOS / SALSAS”).
4. Once the program is complete the product automatically stops. Please note: You
may press the ON/OFF ( ) button to cancel the program at any time. The blinking
green light indicates that the blender is ready.
5. Press the ON/OFF ( ) power button to turn the product off. This product is pre-
programmed to turn off automatically if not used for a period of several minutes. All
lights will turn off when the unit automatically powers down.
Using the Manual and Digital controls
Manual Controls include:
1 - Low Speed
2 - Medium Speed
3 - High Speed
Pulse (PULSO)
Use these controls for personal recipes or to continue blending after an automatic
program is finished.
1. Press the ON/OFF ( ) power button to turn the product on. The power light will
blink, meaning the product is active and ready for use. The light will stay on when the
motor is running.
2. Put the ingredients into the jar.
3. Secure the lid and the filler cap.
USING YOUR BLENDER
Your product includes the following technology and features:
•
2 Automatic Programs:
· Juices and Smoothies (JUGOS Y SMOOTHIES) - Perfect for blending any kind of beverage.
· Food Chop (PROCESADOR DE ALIMENTOS / SALSAS) – Allows to slice, shred
or chop ingredients in blending jar (I.e. soups, purees, salsas, etc.).
•
Reversible Motor Technology
– The exclusive reversible motor technology spins
blades in both directions to completely process all ingredients.
•
Threaded Cup Bottom with Locking Lever
– Advanced design for simple
assembly to jar. Seals jar to blade for leak-proof operation.
•
Blade (2X Larger Blade System than Traditional Oster
®
Blenders)
– 3-in-1 multi-
blade system precisely pulverizes, chops and mixes evenly.
•
Manual Controls
– Give you the flexibility to operate the blender to customize your recipes.
•
Pulse Button
– Press to pulse. Allows you to achieve precise results.
•
Filler Cap / 2-Ounce Scoop
– Scoop function that allows you to measure and add
ingredients during use. Also allows you to open lid to allow steam to escape while
blending hot foods.
•
1.5 Liter Boroclass
®
Glass Jar
– Thermal shock resistant glass jar was created to
withstand extreme temperature changes up to 90°C.
Before you use the product for the first time, separate the filler cap / 2-ounce scoop, jar lid,
1.5 L jar, sealing ring, blade and threaded cup bottom. Wash in warm, soapy water, or top
rack in the dishwasher. Rinse and dry well.
BLADE & JAR ASSEMBLY
1. Place blade into threaded cup bottom (Fig. 1).
2. Place sealing ring over blade assembly.
Carefully press and tuck sealing ring into
last groove of threaded cup bottom (Fig. 2).
3. Ensure the locking sealing ring is fully
and evenly tucked in place and holding
the blade assembly to the threaded cup
bottom. For correct assembly see (Fig. 3).
Fig. 4
Locking Lever
Fig. 3
Incorrect
Correct!
Fig. 1
Fig. 2
Locking
Sealing Ring
Threaded Cup
Bottom with
Locking Lever
Blade
WARNING:
Blade is sharp. Handle with care.
BLSTPYG1309B_BLSTPYG1310RBG_BLSTPYG1311NBG_BLSTPYG1312NBG_22SEM1 (LA).indd 5
BLSTPYG1309B_BLSTPYG1310RBG_BLSTPYG1311NBG_BLSTPYG1312NBG_22SEM1 (LA).indd 5
7/25/2022 10:34:25 AM
7/25/2022 10:34:25 AM
