8
7
Using the Pre-Programmed Settings
1.
Press the power button to turn the product on. The power light will flash,
indicating the product is active and ready to use. The light will stay on when
the motor is running.
2. Select and Press the desired Pre-Programmed Setting Button:
- SMOOTHIE
- SALSA
3. To change your selection, press twice followed by another Pre-
Programmed Setting button (“SMOOTHIE” or “SALSA”)
4. Once the program is complete the product automatically stops. Please note:
You may press the button to cancel the program at any time. The blinking
bule light indicates that the blender is ready.
5. Press the power button to turn the product off. This product is pre-
programmed to turn off automatically if not used for a period of several
minutes. All lights will turn off when the unit automatically powers down.
Using the Manual Controls
The Manual Controls include:
LOW
MEDIUM
HIGH
PULSE
Use these controls for personal recipes or to continue blending after a
Programmed Setting is finished.
1. Press the power button to turn the product on. The power light will flash,
indicating the product is active and ready to use. The light will stay on when
the motor is running.
2. Put the ingredients into the jar.
3. Secure the lid and the filler cap.
Pressing any speed setting will interrupt the active function. e.g. blender is
running on “LOW”, pressing “HIGH” button will change the speed to “HIGH”.
Or pressing “LOW” a second time will turn the blender to the active and ready
to use screen (flashing power button ).
Caring for Your Product
After Use
1. Press the Power Button and unplug blender. Lift the jar straight up from
the base, remove the lid and empty the jar.
2. If necessary, use a rubber spatula to scrape foods away from the sides of the
jar.
Cleaning
WARNING: Blades are sharp. Handle carefully.
CAREFULLY release the blade from the bottom of the jar by turning the
threaded jar bottom counterclockwise. The jar lid, filler cap and blade are
dishwasher safe. Use the top rack of the dishwasher for the jar lid, filler cap,
and blade. Place sealing ring into bottom basket of dishwasher.
You can also wash the parts in warm, soapy water. Rinse well and dry. Wipe
the base with a soft, damp cloth to clean. Never submerge the blender base in
a liquid.
Check the parts as you put them back together.
TIP: Run blender with soapy water for 20-30 seconds
at Low or Medium Speed for cleaning without
disassembly. Follow with clean water rinse.
Storing
Reassemble the blender for storage. Leave the lid
open a gap so no odors are retained.
NOTICE: Never put the jar, or any other parts, in a microwave oven. Never
store foods or drinks in the jar.
Servicing
This appliance has no user serviceable parts. Any servicing beyond the
cleaning described in the Cleaning section should be performed by an
authorized service representative only.
If repairs are needed, send your appliance only to an authorized OSTER
®
Appliance Service Center. Replacement parts are available on www.oster.com
or call 1-800-334-0759.
BLSTJJ-BNT_BLSTJJ-GT0_22EM1 (US).indd 7-8
BLSTJJ-BNT_BLSTJJ-GT0_22EM1 (US).indd 7-8
2022/1/26 下午3:18
2022/1/26 下午3:18