Oster BLSTEG7890B Instruction Manua Download Page 9

English-1

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be 

followed, including the following: 
• 

READ AND KEEP ALL INSTRUCTIONS. 

•  Close supervision is necessary when any appliance is used by or near children, 

or incapacitated persons. 

•  Unplug from outlet when not in use, before putting on or taking off parts, and 

before cleaning. 

•  Avoid contact with moving parts. 
• 

DO NOT

 operate any appliance with a damaged cord or plug or after the 

appliance malfunctions, or is dropped or damaged in any manner. Take 

the appliance to the nearest Authorized Oster Appliance Service Center for 

examination, repair or electrical or mechanical adjustment. 

•  The use of attachments, including canning and/or ordinary jars and processing 

assembly parts not recommended by the manufacturer, may cause a risk of 

injury to persons.

•  Keep hands and utensils out of jar while blending to prevent the possibility of 

severe injury to persons and/or damage to the Blender. If scraping, folding, etc., 

is necessary, turn off and unplug the Blender, and only use a rubber spatula.

•  Blades are sharp. Handle carefully.
•  To reduce risk of injury to persons, never place cutting blades on base without 

Blender jar properly attached.

•  Screw on jar bottom firmly. Injury can result if moving blades become exposed.
•  Always operate Blender with cover in place.
•  Make sure that the voltage in your outlet is the same as the voltage indicated on 

the appliance.

•  Always hold jar while processing. If the jar should turn when the motor is 

switched on, switch off immediately and tighten Blender jar in threaded jar 

bottom. 

DO NOT

 leave Blender unattended while it is operating.

•  Be careful if hot liquid is poured into the food processor or blender as it can 

be ejected out of the appliance due to a sudden steaming. When blending hot 

liquids, remove the feeder cap from the two piece cover. 

DO NOT

 fill Blender jar 

beyond the four cup level. On six-cup models, 

DO NOT

 fill beyond five-cup level. 

Always begin processing at the lowest speed setting. Keep hands and other 

exposed skin away from the cover opening to prevent possible burns.

•  To protect against risk of electrical shock, do not put Blender base in water or 

other liquid. 

DO NOT

 let the cord hang over edge of table or countertop.

 DO NOT

 

let cord rest against hot surfaces.

•  This appliance is not intended for use by persons (including children) with 

reduced physical, sensory or mental capabilities, or lack of experience and 

knowledge, unless they have been given supervision or instruction concerning 

Summary of Contents for BLSTEG7890B
























Reviews: