About This Clipper/Trimmer
Clipper/Trimmer Operation
1. Turn the clipper/trimmer on using the “On-Off” switch and use the unit.
2. Turn the unit off when finished using.
3. Cover the blades with the provided blade guard to protect the blades.
Always apply one to two drops of the provided blade lubricant
or other Oster
®
approved lubricant to the blades before use.
Cutting efficiency may drop and the blades and motor may
be damaged if hair is dirty or hair styling agents have been
applied. Always ensure that hair is clean before using the
clipper/trimmer.
User-Maintenance Instructions
1. The appliance has no user serviceable parts.
2. The product is for commercial use.
3. Keep cord straight while cutting/trimming. If cord becomes
kinked or tangled, stop use and straighten it.
4. Do not wrap cord around the clipper/trimmer when storing. This
can damage the cord insulation.
5. Always take care not to tangle the cord while using or storing the
clipper/trimmer.
6. We recommend storing the clipper/trimmer and cord in the
original carton when not in use.
Changing Blades
This unit is designed with interchangeable blade attachments. It is
not necessary to replace the actual blades.
REMOVING THE BLADES
1. Turn the unit off. Unplug the unit.
2. Push the upper part of the blade away from the unit. The blade
and blade attachment will “snap” off.
REPLACING THE BLADES
1. Turn the unit off. Unplug the unit.
2. Align the blade attachment and the clipper/trimmer by inserting
the small tab on the bottom of the blade attachment into the cut
out receptacle on the bottom of the unit.
3. Push the upper part of the blade towards the unit. The blade at-
tachment will snap securely into the clipper/trimmer. Do not force
the blade attachment. If properly aligned, the blade will snap into
the unit with little force. Forcing the blade attachment will cause
damage to your clipper/trimmer and will void the warranty.
Comb Attachments
Your unit comes with five comb attachments. These are provided to
increase the functionality and enjoyment of your unit.
INSERTING THE COMB ATTACHMENT
1. Insert the cutting edge of the blade into the comb attachment.
2. Snap it tight at the back end of the blade by pushing down on the
Guide Comb Attachment tab.
REMOVING THE COMB ATTACHMENT
1. Push up on the Guide Comb Attachment tab until it releases from
the metal blade.
2. Continue lifting the Comb Attachment away from the cutting edge
of the blade until the Comb Attachment is free.
