8
1270468_1
FAULT DETECTION
• Make sure that the power is connected to the fan.
• Disconnect the power and verify that the impeller is
not blocked.
• Check the LED (1) fl ashing code. See picture A and
the manual for the motor at www.ostberg.com.
(Only applies to RKB 1000x500 F3 EC).
• If the previous steps doesn’t solve the problem,
contact your fan supplier.
• If the fan is returned to the supplier, it must be
cleaned, the motor cable must be undamaged and a
detailed fault description must be enclosed.
1
Picture A
3
2
2
1
View A
View B
View C
RKB 1000x500 EC
9
1270468_1
EU DECLARATION OF CONFORMITY
We hereby confirm that our products comply with the requirements in the following
EU-directives and harmonised standards and regulations.
Manufacturer:
H. ÖSTBERG AB
Industrigatan 2
SE-774 35 Avesta, Sweden
Tel No +46 226 860 00
Fax No +46 226 860 05
http://www.ostberg.com
VAT No SE 556301-2201
Products:
Duct fans: CK, RK, RKC, RKB, LPKB, LPKBS, IRE, IRB, BFS, BFC
Wall fans: CV, KV, RS
Roof fans: TKK, TKS, TKC, TKV, TKH
Exhaust fans: IFK, IFA, CAU
Supply air units: SAU
This EU declaration is applicable for products including our accessories for mounting and installation only if the
installation is made in accordance with the enclosed installation instructions and that the product has not been modified.
Low Voltage Directive (LVD) 2014/35/EU
Harmonised standards:
EN 60335-1:2012, AC 1, A 13 R1, A 11, A 12, A 13, A 1, A 14, A2, Household and similar electrical appliances - Part 1:
General requirements
EN 60335-2-80:2003, A 1, A 2, Household and similar electrical appliances - safety- Part 2: Particular requirements for
fans
EN 62233:2008 Measurement methods for electromagnetic fields of household appliances and similar apparatus with
regard to human exposure
Directive for Electromagnetic Compatibility (EMC) 2014/30/EU
Harmonised standards:
SS-EN IEC 61000-6-1:2019 Electromagnetic compatibility (EMC) - Generic standards - Immunity for residential,
commercial and light-industrial environments
SS-EN IEC 61000-6-2:2019 Electromagnetic compatibility (EMC) - Generic standards - Immunity for industrial
environments
SS-EN 61000-6-3:2007, A1, Electromagnetic compatibility (EMC) - Generic standards - Emission standard for
residential, commercial and light-industrial environments
SS-EN IEC 61000-6-4:2019 Electromagnetic compatibility (EMC) - Generic standards - Emission standard for industrial
environments
Machinery Directive (MD) 2006/42/EC
Harmonised standards:
EN ISO 12100:2010 Safety of machinery - General principles for design – Risk assessment and risk reduction
EN ISO 13857:2019 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower
limbs.
EN 60204-1:2018 Safety of machinery – Electrical equipment of machines – Part 1: General requirements
Ecodesign Directive 2009/125/EC
Harmonised regulation:
1253/2014 Ecodesign requirements for ventilation units
1254/2014 Energy labeling of residential ventilation units (Where applicable)
Standards:
SS-EN 13141-4, SS-EN 13141-8, SS-EN 13141-11 or EN 13053
RoHS 2011/65/EU, 2015/863/EU
Harmonised standards:
EN IEC 63000:2018
Avesta 2020-11-30
Mikael Östberg
Product Manager
