WARNING
NOTE: Do not scrape the bowl while the stand mixer is operating.
The bowl and beater are designed to provide thorough mixing without frequent
scraping. Scraping the bowl once or twice during mixing is usually sufficient.
Turn the stand mixer off before scraping.
The stand mixer may warm up during use. Under heavy load with extended
mixing time, you may not be able to comfortably touch the top of the stand
mixer. This is normal.
TECHNICAL INFORMATION
•
Voltage/frequency : 120V~ 60Hz
550W
•
Bowl capacity: 5.5 QT
•
KB: 5 Minutes (Never use this appliance constantly for more than 10
minutes!)
•
Never use mixer, blender, meat grinder function with food at the same
time(only use one by one to protect the machine)
BEFORE FIRST USE
All parts of the stand mixer are to be thoroughly cleaned before being used for
the first time. (see section: Cleaning).
Take out the required length of cable from the cable tidy on the base of the
blender and connect the device to the mains supply.
TRIAL USE
Revolve the locking switch, then lift the machine arm.
Put the mixing bowl onto the base, and lock it as the arrowhead denotes.
Fix the dusty cover onto the mixing blade, then lock the blade into the machine
Revolve the locking switch, then push the upper cover down and make the arm
