2
IMPORTANT: safety advice
To avoid electric shocks, do not use this appliance in the vicinity of water. Do
not immerse the mains lead in water or other liquid.
Please read through the information and safety advice contained in these
operating instructions carefully and thoroughly before you use the stand
mixer for the first time.
Do not kink or clamp the mains lead. To avoid any risk of stumbling, do not
allow the mains lead to hang over the edge of a table or a counter.
Make sure that the voltage shown on the rating plate corresponds with that
of the mains supply.
The rating plate can be found on the bottom of the motor block. The stand
mixer is only to be connected to an AC supply.
The motor must always be switched off before the stand mixer is connected
with the mains supply.
Only suitable for indoor use only
This appliance should not be set up in close proximity to a naked flame,
easily flammable materials (curtains, textiles, etc. ), a radiator, an oven, or
some other heat source.
Before use, place the appliance on a horizontal and flat surface.
Place this appliance as close as possible to the power source so that you can
disconnect the plug quickly and easily if required.
The appliance must be operated with the type of power specified on the
rating plate.
If you are unsure about the details of the available power supply, ask your
dealer or the local power supply company.
Do not attempt to repair the appliance yourself, since you will be exposed to
hazardous live components or other hazards by opening and removing the
covers.
Repairs should only be carried out by a qualified engineer or service center.
