25087-00 ML
8
towards higher implant stability while a decrease in ISQ values
indicates a loss in stability and, possibly, implant failure. A stable
ISQ value would indicate no change in stability.
14) Data Connection to Osstell Connect
The Osstell Connect
(osstellconnect.com)
is an online tool for
statistical analysis and valuable insights based on your data, with
benchmarks against the entire Osstell Connect database. You can
have your Osstell Beacon online connected to Osstell Connect for
data collection.
Before you can start using data connection to Osstell Connect you
have to register your Osstell Beacon. The serial number can be
found on the back of the instrument. For registration assistance and
features of data connection to Osstell Connect, please visit:
osstell.com/get-started-beacon
15) Cleaning and Maintenance
Before each use, moisten a gauze or soft cloth with an acceptable
(see list below) surface disinfectant and wipe the whole Osstell
Beacon instrument.
Note! Do not autoclave the Osstell Beacon instrument.
Routinely check the surface of the instrument tip and overall surface
for possible cracks and residuals.
Acceptable Cleaners:
Isopropyl alcohol
Ethyl alcohol-based cleaners
Do not use:
Strong alkali detergent of any type, including hand soaps and dish soaps
Bleach based cleaners
Hydrogen Peroxide based cleaners
Abrasive cleaners
Acetone of hydrocarbon based cleaners
MEK (Methyl Ethyl Ketone)
Birex
Gluteraldehyde
Quaternary Ammonium Chloride salt-based cleaners
The instrument does not require regular maintenance. In the event
of an instrument malfunction, contact the local sales representative
or distributor for further instructions.
SmartPegs:
Delivered sterile. The SmartPegs™ are disposable and
should only be used for one or multiple measurements at one
treatment session, for a single patient only (to avoid cross-con-
tamination).
TestPeg:
Is not used intra-orally, does not require sterilization.
