Potentiostat
User Manual
Ossila.com
15
Ossila Limited © 2020
I.
If the name is already in use, you will be asked if you wish to overwrite the previous
profile.
II.
The name cannot contain the characters: \
/ : * ? “ < > |
III.
You can change the default settings by choosing the name ‘Default’.
•
The settings profile will be added to the drop-down box using the given profile name.
(II)
Settings Profiles
•
Select a saved settings profile from the drop-down box.
I.
The settings fields will be populated with the saved values from the selected
profile.
•
Settings profi
les can be deleted by selecting the profile and then clicking the red ‘delete’
icon next to the drop-down box.
9.2.3
Measurement Controls
Figure 9.5.
Controls to start and stop the measurement.
(I)
Measure
•
Clicking this button will start the measurement using the chosen settings.
•
This button cannot be clicked if the software has not detected a unit
(II)
Abort
•
Stops a measurement that is currently in progress.
9.2.4
Graph Controls
(I)
Potential and Current Readout
Whilst the mouse cursor is over the graph, the potential and current of its location are displayed
to the bottom-right of the graph, as shown in
