9
HOW TO CHARGE MY OSSBY CURVE ELECTRIC
The Ossby Curve Electric can be
recharged with the charger
(provided with the purchase of the
bicycle) by plugging it into any
domestic electrical outlet. To
connect it to the bike it is necessary
to remove the rubber protector
and the small metal switch located
in the centre of the rear wheel axle
simply by pulling them out. Once
the connection is released, you just
need to insert the plug of the charger.
The battery can be fully recharged in between 3 and 4 hours. The status
light will confirm when charging is complete. The red light means that it is
not fully charged yet, and it will turn green when the charge is complete.
The battery can be charged when needed, there is no need to wait until it
completely runs out. If you are not going to use the bicycle for a long time,
make sure you leave the battery slightly charged.
Finally, we advise you to charge the battery at least every 3 weeks to
guarantee battery performance over time.
⚠︎
Attention: it is important not to leave the battery plugged in for several
days. Once charging is complete, disconnect the charger as soon as
possible.
MAINTENANCE AND SERVICE
During maintenance, be careful not to put your hands or fingers in places
where they could be pinched or trapped, such as the folding knots of the
bicycle, the wheels ...
Cleaning
Do not use high-pressure water jets or soapy solutions as this could
contribute to the deterioration of the components and the frame of the
Ossby Curve. Use a soft cotton cloth.
Periodic revisions
⚠︎
Ossby bicycles are assembled in our factory with quality components. If
replacement parts of inferior quality are used, it can affect the experience
on the bike and limit its properties, even cause defects or breakage. Do not
attempt to repair or replace components yourself. Find a professional store
to make the important repairs.
TIGHTENING TORQUE
In the following tables we detail the main tightening torques that you must
apply for basic bicycle maintenance:
Torque
Headset:
Stem
17-20 Nm
Handlebar
4-5 Nm
Other components:
Wheel axle
35-40 Nm
Seatpost
18-20 Nm
