manualshive.com logo in svg

Ossa 2013 TR280i, User Manual

Share
Download
Ossa 2013 TR280i User Manual Download Page 39

  User manual   39

Radiator

The radiator contains the engine refrigerant. To fill up with or add 
refrigerant to the radiator, locate the tank lid. To locate this lid, de-
tach the air filter lid (see page 36 - Air Filter). Once the filter lid is 
detached,  the  radiator  lid  is  visible.  Unscrew  the  lid  and  pour  in 
refrigerant.

ATTENTION: 

Use  gloves.  Do  not  open  the  lid  if 

the engine is hot. This could cause burns. Avoid 
contact of the liquid with the eyes, mouth or na-
sal passage. Do not ingest. In the event of this 
happening,  follow  the  product  instructions  and 
consult a doctor.

The radiator has an electric fan to force air through it, as can be 
seen

To fill the radiator, special coolant should be used 
-30ºC.

To  ensure  that  the  motorcycle  works  correctly,  periodic  controls 
must be carried out to check the coolant levels. This will ensure
that the motorcycle is running at an optimum temperature.

Always use special refrigerant for light alloy engines.

Summary of Contents for 2013 TR280i







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands