Osram DALI EN-DB-1L-GB2, Wiring And Installation Manual

Page: 2 / 8

Overview
The OSRAM DALI Bridge attaches to the GreenBus II
®
network and enables
the ENCELIUM
®
EXTEND Light Management System to digitally control DALI
ballasts/drivers.
The module makes each DALI-compliant ballast addressable via the GreenBus II.
It will obtain its address during the commissioning process and no actions are
required during installation.
The following model is available:
Part Number
EN-DB-1L-GB2
2
Important Safeguards
When using electrical equipment, basic safety precautions should always
be followed, including the following:
— READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
—
Do not let power supply cords touch hot surfaces.
— Do not mount near gas or electric heaters.
— Equipment should be mounted in locations and at heights where it will not
readily be subjected to tampering by unauthorized personnel.
— The use of accessory equipment is not recommended by OSRAM as it may
cause an unsafe condition.
— Do not use this equipment for other than the intended use.
SAVE THESE INSTRUCTIONS