Osram Claypaky CloudIO, Instruction Manual

Page: 23 / 38

6
7
5
CHANGE CLOUDIOBOX LINE 2 - INCOMING TEST
ONLINE
BATCH OVERVIEW FIRMWARE UPDATE DMX SETTINGS
Claypaky
HEPIKOS
DMX Address
Firmware on board
Lamp hours
001
2.24.00
3
Claypaky
HEPIKOS
DMX Address
Firmware on board
Lamp hours
001
2.24.00
3
Claypaky
HEPIKOS
DMX Address
Firmware on board
Lamp hours
001
2.24.00
3
Claypaky
HEPIKOS
DMX Address
Firmware on board
Lamp hours
001
2.24.00
3
Claypaky
HEPIKOS
DMX Address
Firmware on board
Lamp hours
001
2.24.00
3
Claypaky
HEPIKOS
DMX Address
Firmware on board
Lamp hours
001
2.24.00
3
Claypaky
HEPIKOS
DMX Address
Firmware on board
Lamp hours
001
2.24.00
3
Claypaky
HEPIKOS
DMX Address
Firmware on board
Lamp hours
001
2.24.00
3
Claypaky
HEPIKOS
DMX Address
Firmware on board
Lamp hours
001
2.24.00
3
Claypaky
HEPIKOS
DMX Address
Firmware on board
Lamp hours
001
2.24.00
3
Claypaky
HEPIKOS
DMX Address
Firmware on board
Lamp hours
001
2.24.00
3
Claypaky
HEPIKOS
DMX Address
Firmware on board
Lamp hours
001
2.24.00
3
Claypaky
HEPIKOS
DMX Address
Firmware on board
Lamp hours
001
2.23.00
3
Claypaky
HEPIKOS
DMX Address
Firmware on board
Lamp hours
001
2.23.00
3
START DISCOVERY
SETTINGS
CPU
ARM9_PT_0.10
Pan/Tilt Type 1
ALEDA_K10_3.11
Led Driver ALEDA K10
ARM9_HW_14.0.000 UPDATE
CPU STandard
23
By selecting the fixtures in the panel and clicking on the START LOCATE button, the selected fixtures will start
blinking in such a way as to be identified by the user.
The info button on the lower right of the screen, if clicked, it shows the health status of the DMX line, retry number
indicates health if it is 0 everything is ok, if it is greater than 0 it is possible that there are problems on the network,
in this case you will need to check cables, check welds, check for the presence of comliant RDM splitters.
START LOCATE
HEALTH STATUS DMX LINE “i”
5.4.3 FIRMWARE UPDATE
From this page the user can upload the firmware on the connected fixtures and can update the firmware
simultaneously on multiple fixtures with a single click.
The system will automatically suggest which type of firmware the fixtures need and on which board.
The flag near every selection box will select which firmware will be sent to the DMX network.
A downgrade installation is also possible, selecting the desired firmware from the selection box.
screen operaton firmware update select