31
Dismounting
The device enters the bootloader mode and the firmware loader window
is displayed:
4.
Browse for the new firmware file and click “upload” to start the
updating process. Wait until the process has finished to get back to
normal operation. Acknowledge the firmware version and the Dashboard
page appears.
The firmware update is completed.
To abort the firmware update, click “abort and restart”. Wait for the device
to reboot.
9 Dismounting
Disconnect all attached cables. Dismount the e:cue SYMPL bridge Node
from the rail by pulling the black DIN rail handle and unhitching the SYMPL
Node. The dismounting is completed.
!
Before dismounting, appropriate measures must be taken to
protect the respective components against damage caused
by electrostatic discharge (ESD protection).
