10
General remarks
2.3
User interface: LEDs
The SYMPL Switch has six LEDs on the front panel. The six LEDs show the
basic states of the SYMPL Switch.
LEDs
Power
Off: no power.
On: power supplied.
Act/PoE
Off: no link available.
Green: link established; e:net link/ traffic.
Red: PoE supplied.
Orange: PoE supplied and e:net link/ traffic.
e:net
Off: no link available.
On: link established.
Blinking: e:net traffic.
3 General remarks
3.1
Transport
Only transport the device in its original packaging. This protects the device
from damage.
3.2
Unpacking
Only unpack the SYMPL Switch at its installation location. To protect the
device against condensation water, unpack it and wait until all moisture
remaining in the device has evaporated. Condensation can occur when the
device is moved from a cold to a warm location. Keep the packaging for
use in case of further transport. Inspect all parts for completeness
regarding chapter “2.1 Delivery content” on page 08. If there is apparent
damage to the device or parts are missing from the delivery scope, please
contact the OSRAM support service.
