Osram AB465960038, Setup Manual

Page: 22 / 62

22
Setup Manual - LIG
In every step, the connected fixtures show the current state of the Scene, e. g. color,
effect or brightness.
i
Abort the advanced programming mode at any point by keeping
the Zone C button touched for at least five seconds.
Touching the Zone C button once returns to the previous step.
During advanced editing no time-out of this mode occurs, like changing Tone or
speed in standard mode. Either you execute the complete programming and save
the Scene, or you abort the programming with a long touch of the Zone C button.
Step 1: Select the channel types for RGBW (only in RGBW Mode)
When the DIP switches are not set to fixture type RGBW, this step is skipped by
the LIG. As RGBW fixtures have many control possibilities you can select
specifically how the RGB and white channel are used for the remaining steps of the
advanced programming mode.
y Step 1: White channel only, RGB off
y
Step 2: White channel off, RGB only
y
Step 3: RGB, 100% White (fixed channel value)
y
Step 4: RGB, 10% White (fixed channel value)
...
y
Step 12: RGB, 90% White (fixed channel value)
y
Step 13: RGB+W (color cycle with adjustable white
level)
Use the Scene Buttons to select the following configurations:
y
Scene 1: White channel only, RGB off
y
Scene 5: RGB, 25% White (fixed)
y
Scene 2: White channel off, RGB only
y
Scene 6: RGB, 50% White (fixed)
y Scene 3: RGB, 100% White (fixed) y Scene 7: RGB, 75% White (fixed)
y
Scene 4: RGB, 15% White (fixed)
y
Scene 8: RGB+W (color cycle
with adjustable white level)
Proceed to the next step (2) by pressing the Jog-Wheel.
x
Step 1:
Control white channel
only
Step 2:
Control RGB channel
only
Step 3-12:
Control RGB c
fixed intensity for white
channel
Step 13:
Control RGB+W based
on a color circle with
adjustable white level