Wallstation Feature Description
The wallstation when used in an application can recall 3 preset scenes.
However, these 3 scenes are customizable based on the user’s CCT and
brightness preference. The factory default and custom scenes are stored in the
LED driver. The following figure shows the behavior of different buttons when in
the factory default mode. To save a custom scene setting, obtain the desired
brightness and color level using the “Brightness” and “Color” button
respectively. After desired level is achieved, long press any Scene button for
6 seconds to program. The LED indicator will flash 5 times and then settle
indicating that the setting has been saved.
115.4
71.4
6.1
2700K, 100% brightness
4000K, 100% brightness
Brightness
Brightness
Shift to Cooler White
Shift to Warmer White
Power On/Off
6500K, 100% brightness
8