Shenzhen Ospri Intelligent Technology Co., Ltd.
5
Chapter 2 General Introduction
2.1 Product Principle
The laser beam is generated by the laser, transmitted by the external
optical path, focused by the focusing lens in the welding head, and then
acted on the welded gap between the materials being processed. With the
assist of protective gas (preventing material from being oxidized), the
material is liquefied to form a specific molten pool, so as to achieve the
purpose of welding.
2.2 Product Parameter
Item
Specification
Laser Power
≤2000W
Collimation Length
50mm
Focus Length
100mm
Wobble Oval Spot Size:
1.5mm
Nozzle Aperture
5 mm
Auxiliary Gas Pressure
<1.0Mpa
Connector Type
QBH
Applicable Laser Brand
Raycus, IPG, etc.
Table 2.2.1
2.3 Attention
Warning:
When the laser is used for the product process, please
use a protective device to prevent the damage of the laser beam to
the human body.