VOLT/VIVA SERIES
6
FEATURES
RESERVOIR SLEEVE
M - 75L / 60L W - 65L / 50L
The dedicated internal hydration sleeve keeps the reservoir close to the back,
which provides proper weight distribution when carrying the pack.
+ The loop with buckle ensures proper vertical orientation and stability
+ The backpanel hydration exit port is centered, allowing routing to the right or
left side of the harness
+ Elasticized routing straps on right or left side of the pack’s harness hold the
reservoir hose in place
+ Compatible with any reservoir up to 3L
RAINCOVER
M - 75L / 60L W - 65L / 50L
1 Locate the raincover icon near the base of the pack.
2 Remove raincover from compartment and slide it over the top and bottom of
the pack.
3 Tighten the cord lock at the bottom of the raincover to tension the raincover
into place.
4 To completely remove the raincover from the pack, unfasten the hook-and-
loop strap from the cord loop inside the raincover compartment.
Tip: To prevent mildew, remove raincover and allow to dry entirely after use in
the rain.
STOW-ON-THE-GO TREKKING POLE ATTACHMENT
M - 75L / 60L W - 65L / 50L
Osprey's Stow-on the-Go trekking pole attachment is designed to quickly stash
and carry trekking poles without taking off the pack.
1 Adjust the trekking poles to their minimum length. (optional)
2 Locate the elasticized loop on the lower left side of pack. While pulling the loop
out from the pack, insert the basket end of the trekking poles into the loop.
3 On the left harness strap, locate the trekking pole icon. Pull up on the cord to
open, place pole handles in the loop and tighten with the cord lock to secure.
4 Reverse these steps to remove.
ICE AXE LOOP
M - 75L / 60L W - 65L / 50L
1 Slide the ice ax shaft through the top of the ice tool loop and fl ip the shaft up
toward the top of the pack.
2 Loosen the bungee cord lock and route the tool handle through the bungee.
Tighten the cord lock, nesting it into the Y-clip to secure the tool into place.
3 Reverse above steps to remove.
