TALON / TEMPEST SERIES
7
FEATURE DETAILS
EXTERNAL RESERVOIR SLEEVE
30L / 28L / 20L / 18L
External reservoir sleeve located behind the
shoulder harness, allows for easy loading/un-
loading of a hydration reservoir. Place reservoir
inside the sleeve to help provide proper weight
distribution. Clip reservoir to buckled loop to
keep upright.
HARNESS ADJUSTMENT
30L / 28L / 20L / 18L
Loosen load lifter straps at the top of the harness, slide hand between
backpanel and harness to release hook and loop attachment and slide
harness into position using arrows to guide. Firmly press on backpanel
to reengage hook and loop attachment.
DUAL AND SINGLE ICE TOOL LOOPS
30L / 28L / 20L / 18L
Dual and single ice tool loops provide secure storage
for mountaineering axes and ice tools.
A Slide the tool shaft through the top of the ice
tool loop and flip the shaft up toward the top
of the pack.
B Loose the bungee cord lock and route the too
handle through the bungee. Tighten the cord
lock nesting it into the Y-clip to secure the tool
into place.
C Reverse to remove.
LIDLOCK™
20L / 18L
To use LidLock™ helmet attachment, locate
LidLock™ clip on top front panel of pack, pull clip
away from pack, pass through helmet vent and
secure in horizontal position. The cord located on the
inside of the pack is used to increase or decrease
tension as needed. Reverse to remove helmet.
SIDE STRETCH MESH POCKETS
30L / 28L / 20L / 18L
Stretch mesh pockets on both sides of pack
provide convenient storage for smaller items.
DUAL UPPER (30/28 ONLY) AND LOWER SIDE
COMPRESSION STRAPS
30L / 28L / 20L / 18L
InsideOut™ Compression straps compress pack
when not full to ensure stable carry and secure items
in side pockets. They can be routed inside or outside
of the side mesh pockets:
A Locate duckbill buckle at the top and side of
each side pocket and unthread the webbing.
B Route the webbing by positioning the slider
buckle inside or outside of the side pocket and
reverse the process.
