![background image](http://html1.mh-extra.com/html/osprey/talon-g2-model-sah-e23/talon-g2-model-sah-e23_user-manual_1656355043.webp)
Osprey Talon User Guide
42
© 2016 Osprey Video. Osprey®, Ceylon® & SimulStream® are registered trademarks of Osprey Video AG. All other trademarks are the property of their respective owners.
Product specifications and availability may change without notice <20161223
Locating Talon with Osprey BOSS
Talon is managed via a web based GUI that can be accessed over the network by
most web browsers. All you need to do is type the IP address of the Talon you wish to
access into the address bar of the browser. The simplest way to determine the IP
address is to power up Talon and connect it to the LAN. Once it is fully booted up and
on the network, Osprey BOSS will locate it and notify you of the IP address.
BOSS can be used if you do not know the exact IP address of your Talon systems. BOSS discovers Talon
devices on the network by broadcasting data packets to all IP addresses within your PC’s subnet (i.e. the
IP range that your PC is currently in). This means that the computer that is hosting BOSS should be on
the same IP subnet as Talon.
To locate all Talon devices on your subnet, click the “Locate Devices” button on the BOSS interface.
BOSS will populate with the Serial number, Device name, IP and MAC Address along with the Description
for all Talon encoders on this subnet.
To access a particular Talon, click on its Serial Number and you will be taken to the web GUI.
The “Always Listen” check box is only valid for Talon versions 1.6.0.212 and abo
ve. Checking will cause
BOSS to continually refresh Talon information without pressing “Locate Devices” again.
Summary of Contents for Talon G2 model SAH-E23
Page 1: ...Osprey SAH E23 User Guide...