Osprey Talon User Guide
29
© 2016 Osprey Video. Osprey®, Ceylon® & SimulStream® are registered trademarks of Osprey Video AG. All other trademarks are the property of their respective owners.
Product specifications and availability may change without notice <20161223
Audio Info
When “Audio Enable” is set to “True” the web
interface exposes the “Audio Info” fields.
Available options change to reflect the
Output Format as set in the Output Setup
area. Only the audio features used by the
particular input will appear.
Enable (all formats)
For Web streaming, only 1 pair of audio inputs
may be used at a time. Enable the input from
“Sub Channel 1” by selecting “yes”. When UDP
is selected, a total of 4 Sub Channels become
available.
Source (all formats)
Select from HD/SDI, HDMI, or Analog.
Codec (all formats)
For live streaming select from AAC-LC (low complexity) or AAC-HE (high efficiency). The
audio codecs labeled MPEG2 and MPEG1L2 are only used for MPEG2 TS streams.
Mode (all formats)
Select Stereo or Mono. Stereo is the default. When using Mono, you may select which of
the incoming pair contains the audio. Mono output will either use the left or right
channel, or in the case of a stereo input you may select to average the two channels.
Rtp Port (RTP only)
Select the audio port for the RTP stream. Default setting is 8900, but any port can be
selected. Common usage is from 4000 to 40000.
Pid (UDP only)
Identifies the UDP Process ID for this port.
Max PTS-PCR (UDP only)
Sets the maximum deviation for Presentation Time Stamps and Clock
Reference in UDP and MPTS delivery. Default is 250.
Format (UDP only)
Values are ADTS and LATS. Use the default ADTS for RTMP streaming.
Jumbo PES (UDP only)
Enables Jumbo PES and allows specification of number of AUs. Default is None.
Summary of Contents for Talon G2 model SAH-E23
Page 1: ...Osprey SAH E23 User Guide...