RACKMOUNT 8x8 MATRIX SWITCHER
MSS-8
Software Controls
Using Osprey Control Panel Software
SCANNING: Scans the Network for all connected Osprey switchers
SETTING:
Switch between LAN or Serial Connection
LOCK:
Lockout of the Unit Keypad to prevent unwanted I/O changes
INPUT:
Selection of Input Channel
OUTPUT:
Selection of Output Channel
APPLY:
Applies the I/O Selections
STATUS:
I/O Connections. Left to right shows Outputs 1 through 8
REFRESH:
Updates the I/O status in the Software Interface to capture Changes
made on the keypad while the Software was running
ONE to ALL: Simultaneous connect one Input to all Outputs
ONE to ONE: Simultaneous connect Input 1 to Output 1, Input 2 to Output 2,etc
BACKLIGHT: Change brightness and behavior of the Units Display
Note: The units IP default is DHCP. A static IP assigned under “Settings” it will revert back
to DHCP after each power cycle
www.ospreyvideo.com
3
