7360M / 7361M
MANAGER’S CHAIR
ASSEMBLY INSTrUCTIONS
© Office Star Products August 2010
2
3
4
6
6
5
1
PART
QTY
1.
Base . . . . . . . . . . . . . . . . . . . . . . . 1
2.
Casters . . . . . . . . . . . . . . . . . . . . . 5
3.
Cylinder . . . . . . . . . . . . . . . . . . . . . 1
4.
Mechanism . . . . . . . . . . . . . . . . . . 1
5.
Chair Body . . . . . . . . . . . . . . . . . . . 1
6.
Arms . . . . . . . . . . . . . . . . . . . . . . . 2
7.
Arm Screws . . . . . . . . . . . . . . . . . . 4
8.
Mechanism Screws . . . . . . . . . . . . 4
9.
M5 & M6 Allen Wrenchs
(not shown) . . . . . . . . . . . . . . . . . . . . 2
8
7
7
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) snap into place. Insert Pneumatic Cylinder (3) into Base (1).
STEP 2
Attach Mechanism (4) to bottom of Chair Body (5) with the arrow towards the front of the chair, using four Mechanism Screws (8).
FULLY TIGHTEN ALL SCrEWS USING ALLEN WrENCH (9).
STEP 3
P
lace the assembled seat on top of Pneumatic Cylinder (3) and apply downward pressure.
STEP 4
Align holes of Arms (6) with holes of Chair Body (5), secure Arms (6) using two Arm Screws (7) for each Arm,
FULLY TIGHTEN ALL SCrEWS USING ALLEN WrENCH (9).
ATTENTION: MAKE SUrE ALL SCrEWS ArE FULLY TIGHTENED BEFOrE USING CHAIr.
