8
89
Subject to change without notice • Ändringar kan förekomma
MX 12 pump kit - optional
For central heating systems
OSO MX 12 pump kit contains a cir-
culation pump, shunt valve, air bubble
vent valve and a 12 l. expansion vessel,
factory assembled in an insulated and
easy-to-fit cabinet. The kit can be fitted
on either side of the EP2 water heater
central, and is easily mounted on the
wall next to the EP2.
The MX12 provides an easier and tidier
way to assemble your heating system,
and is in addition sound and heat insu-
lated.
The subtle gray coloured cabinet hides
the pump assembly and is both visually
pleasing and energy effective, reducing
heat loss from the components within.
The MX 12 pump kit is available in
selected countries, contact your OSO
representative for further instructions.
The OSO MX12 provides a tidy look to
your installation, while at the same time
reducing noise and saving energy from
heat loss.
Warranty
OSO hot water cylinder
The stainless steel inner vessel is guaranteed against material defect or manufacturing faults for 10 years from the date of purchase.
Factory fitted electrical elements, thermostats and valves are guaranteed for a period of 2 years. The warranty does not cover ab-
normal limescale on the heating element and/or valves, or the body exposed to outside damages.
Conditions for warranty:
The water quality shall be in accordance with European Council Directive 98/83 EC, or revised version.
Chloride content:
Max. 250 mg/l
Sulphate content:
Max. 250 mg/l
Combination Chloride/sulphate:
Max. 300 mg/l (in total)
1. The OSO cylinder must be installed in compliance with the OSO Installation & Maintenance Instructions, as well as all current
legislation and regulations governing the installation.
2. The OSO cylinder is filled with water before turning the electricity supply on.
3. If the newly fitted water heater is not in regular use, it must be flushed through with fresh water for at least 15 minutes (open
hot water tap) once per week, during a period of at least 4 weeks.
4. Defects caused by frost, excess pressure, salt dehardner process, transient voltage, lightning strikes or incorrect installation,
repair or use, are not covered by this warranty.
5. Evidence of the purchase date and the date of supply must be submitted with your claim.
6. Original OSO spare parts must be used.