O P E R A T O R ’ S M A N U A L
8
Basic Operation
1.
Mower
a. Make sure mower is on grass, that there are no obstacles
in front of the mower or debris on the ground.
b. Adjust the cutting height to the desired level prior to
connecting the battery and powering ON the mower, by
utilizing the height adjuster handle on the back for the rear
wheels and the levers at the each of the front wheels.
i.
Warning - Adjusting the height-of-cut could bring
your hands into contact with a moving blade and
result in serious injury. Shut off the mower, unplug
and remove the battery and wait for all moving parts
to stop before adjusting the cutting height. Do not
put your fingers under the cutting deck when
adjusting the cutting height.
c. Next, place the battery in the mower battery bay and plug
it in to the mower, toggle the main switch to the ON
position and disengage the Emergency Stop button by
slightly rotating it clockwise. Wait for about 15 seconds
while the mower fully powers on. The LED lights on the
main mower housing will light up when the mower is ready
to use.
i. Note: The blade will not start until the mower has
fully booted up, but the self-propel system is
available.
d. With the mower LED lights on and Emergency Stop
disengaged, the mower is now ready to be used.
e. Self-Propel System
i. To activate the self-propel system,
gently
pull up
the control lever until the mower starts to move
forward. The more the control bar is pulled, the
faster the mower will travel.
Warning - If you are new user, please first
familiarize yourself with this mower’s drive
control. Practice on an open grassy area by
slowly pulling the control bar and understanding
