11
Intended use
>
HandXcenter is intended solely for use inside of buildings.
>
Any other use is not authorized. For any damages or injuries resulting from
unauthorized use, the manufacturer will not assume any liability. Alone the
operator assumes the risk for such use.
>
Intended use of HandXcenter also includes the compliance with the operation, repair
and maintenance conditions as stipulated by the manufacturer.
>
Any relevant accident prevention regulations as well as any otherwise generally
accepted rules for work safety and working practices are to be observed.
>
Any own alterations or modifications made to the machine eliminate the liability of
the manufacturer for any resulting damages.
>
For any damages to the machine and treated substrates caused by the use of
incorrect brushes, pads or cleaning agents, the manufacturer will not assume any
liability.
Product liability
It should be explicitly noted by the operator that the machine may only be used as in-
tended. In the case the machine is not used as intended, this happens under the sole
responsibility of the operator. Any manufacturer liability is thus eliminated.
Safety hazards
>
When the machine is stationary, the pad motor must be turned off immediately to avoid
any surface damages.
Work area
>
The work area is generally at table height and should be free of any blocking objects.
Approved maintenance staff
>
HandXcenter may only be maintained or repaired by persons with the necessary
trade and legal credentials.
Cleaning agents
>
When using cleaning agents and care products, the safety warnings provided by
the manufacturer are to be observed. It may be necessary to wear safety goggles
and protective clothing.
>
Only use low foaming and inflammable cleaning agents that do not contain any
hazardous substances.
The hazards of using highly flammable, combustible, toxic, hazardous, corrosive
or irritant substances are to be explicitly noted.
Initial use
>
Machine operator training is the responsibility of those who purchase the machine.
