T R O U B L E S H O O T I N G
Problem:
/HDNFRPLQJIURPEHWZHHQWKHKRXVLQJERZODQGȴOWHUKHDG
Solution:
7DNHWKHERZORDQGHQVXUHWKHRULQJLVFRUUHFWO\VHDWHG5HPRYHWKHRULQJ
and check it for any bumps or stretches. Re-grease the o ring, thoroughly to ensure all
sides of it are nicely greased. Reseat the o-ring and apply some more grease for good
measure. Then screw the bowl back on and use the spanner to tighten it up and
UHFKHFNΖI\RXKDYHDSUREOHPZLWKWKH&ROGVWUHDPȴOWHUKRXVLQJOHDNLQJHQVXUHWKDW
\RXKDYHQRWXVHGWKHERWWRPDQGRQO\WKHWRSUXEEHUULQJRQWKHȴOWHULWVHOIΖIWKLV
does not work, contact our technical customer care team.
Problem:
/HDNLQJFRPLQJIURPSUHVVXUHUHGXFLQJYDOYHVFUHZ
Solution:
Tighten the screw up. If this does not work, contact our technical customer
care team.
Problem:
/HDNIURPLQOHWDQGRXWOHWȴWWLQJV
Solution:
ΖIWKLVLVFRPLQJIURPWKHSXVKȴWWLQJVLGHWKHQWDNHRXWWKHSLSHDQGHQVXUH
WKHHQGLVFOHDQDQGVWUDLJKWDQGQRWEXUUHGRUPLVFXW3XVKWKHȴWWLQJEDFNLQWKRU
-
oughly to ensure the collet ring pops out. Then retest it. If this does not work, contact
our technical customer care team. If the leak is coming from the male/female threaded
side, then this is most likely because there is not enough tape on the thread or can be
EHFDXVHWKHUHLVWRRPXFKWDSH5HPRYHDQ\WDSHDQGSXWZUDSVDURXQGLW5HȴWWKH
ȴWWLQJDQGWU\DJDLQ7KHUHLVDFKDQFHWKHȴWWLQJLISODVWLFKDVEHFRPHFURVVWKUHDGHG
and therefore will not seal. If so contact our technical customer care team for help.
Telephone: 0330 113 7181
Email: [email protected]
osmio
